Supply voltage: 5VDC

Current: greater than 100mA

Load: 250V 10A AC or 30V 10A DC

Dimensions: 50.5mm (length) * 38.5mm (width) * 18.5 (height)

Weight: 31g

PCB color: black

4 fixing screw holes around the board, hole diameter 3.1mm, easy to install and fix

The relay uses high quality Songle relay, single pole double throw. a common end, a normally open end, and a normally closed end

Optocoupler isolation, good anti-interference

Low level pull-in, high level release. The status indicator is on when the inverter is closed, and the status indicator is off when released.

VCC is the system power supply and JD_VCC is the relay power supply. Plug in the jumper cap

Relay contact capacity 250V10A. Relay output is normally open, normally closed;

Active low. Relay signal input voltage range: 0-5V;

VCC system power supply. JD-VCC relay power supply. JD-VCC and VCC are shorted.

 

 

VCC: system power supply positive

GND: system power supply negative

IN1--IN2: Relay Control Port

(Do not reverse)

 

 

1 x 2 Channel 5V DC Relay Module